中壓共軌HEUI噴油一體機
CR318-S
檢測HEUI噴油器
檢測共軌噴油器
創新雙操作室設計
電腦和操作室均可推拉
測試項目
檢測所有的共軌噴油器
檢測壓電式噴油器
檢測所有的HEUI噴油器
一．密封性測試
1. 機油靜態密封性
2. 柴油靜態密封性
3. 動態下機油回油量
二．噴油量測試
1. 最大噴油量測試
2. 中速噴油量測試
3. 高速噴油量測試
4. 預噴射油量測試
5. 啟動噴油量測試
6. 各工況下的機油回油量
| 技術參數 | |
| 供電電壓 | 220VAC/380VAC |
| 相數 | 單相/三相 |
| 頻率 | 50Hz/60Hz |
| 電流 |
30A(Max) |
| 電機功率: 油溫控制 |
5.5Kw 加熱/強制冷風 |
| 油溫設定 | 40攝氏度 |
| 使用環境溫度 | 小于35攝氏度 |
| 最大共軌壓力 | 180-240Mpa |
| 最大機油壓力 | 25Mpa |
| 控制回路電壓 | DC24V/DC12V |
| ECU內部升壓 | 0-200VDC(Max) |
| 測試油箱容積 | 19升 |
| 噪音水平 | <85dB |
| 重量 | 350kg |
| 外觀凈尺寸 | (長x寬x高)140×78×158cm |
| 包裝后木箱 | (高x寬x長)150×85×165cm |
CR318-S
Testing HEUI injectors
Testing common rail injector
Innovative dual operator room design
Both the computer and the operating room can be pushed and pulled
Test items
Testing all common rail injectors
Testing piezo injector
Testing all HEUI injectors
One:Leakage test
1. Oil static leaking test
2. Diesel static leaking test
3. Dynamic state oil return
Two: Fuel injection test
1. Maximum fuel injection test
2. Medium speed fuel injection test
3. High-speed fuel injection test
4. Pre-injection oil quantity test
5. Start fuel injection test
6. Oil return oil under various working conditions
| Technical parameters | |
| Power supply | 220VAC/380VAC |
| Phase | Single phase/ Three phase |
| Frequency | 50Hz/60Hz |
| Current | 30A(Max) |
| Motor Power | 5.5Kw |
| Oil temperature control | Heating /strong cooling wind |
| Oil temperature setting | 40 degrees Celsius |
| Use ambient temperature | less than 35 degrees Celsius |
| Maximum common rail pressure | 180-240Mpa |
| Maximum oil pressure | 25Mpa |
| Control loop voltage | DC24V/DC12V |
| ECU internal boost | 0-200VDC(Max) |
| Test tank volume | 19L |
| Noise level | <85dB |
| Weight | 350kg |
| Net size | (L*W*H)140*78*158cm |
| Wooden package size | (L*W*H)165*85*150cm |
功能特點
博世IQA碼生成
機油壓力自動手動靈活調節
機油回油流量自動檢測
柴油噴油響應時間測試
機油響應時間測試
電磁閥電阻測試
電磁閥電感測試
以下為選配
德爾福I20、I3C碼生成
電裝QR碼生成
西門子ICC碼生成
Features
Bosch IQA code generation
Automatic and manual adjustment of oil pressure
Automatic detection of oil return flow
Diesel fuel injection response time test
Oil response time test
Solenoid valve resistance test
Solenoid valve inductance test
The following is optional
Delphi I2C, I3C code generation
Denso QR code generation
Siemens ICC code generation
